Instructions Si01-501
82 System Configuration
12
To change the air flow rate setting
5. Press “FAN setting button”.
NOTE
DRY mode COOL or FAN mode
The air flow rate setting is not variable.
Five levels of air flow rate setting from “ ” to “ ”
plus “ ” are available.
Note on DRY operation
• The computer chip works to rid the room of humidity while maintaining the temperature as
much as possible. It automatically controls temperature and fan strength, so manual adjust-
ment of these functions is unavailable.
Note on air flow rate setting
•
At smaller air flow rates, the cooling effect is also smaller.
To Next Page
Loading...
Need help?
General
