Si01-501 Instructions
System Configuration 83
2.3.4 Adjusting the Air Flow Direction
13
Adjusting the Air Flow Direction
You can adjust the air flow direction to increase your com-
fort.
To adjust the horizontal
blades (flaps)
1. Press “SWING button ”.
“ ” is displayed on the LCD.
2. When the flaps have reached the
desired position,
press “SWING button ” once
more.
• The flap will stop moving.
To adjust the vertical blades (louvers)
3. Press “SWING button ”.
“ ” is displayed on the LCD.
4. When the louvers have reached the desired position, press the
“SWING button ” once more.
•
•
The louvers will stop moving.
C
TEMP
ON/OFF
POWERFUL
MODE
TIMER
FAN
SWING
ON
CANCEL
OFF
ON
1, 2
3, 4
•
To Next Page
Loading...
Need help?
General
