Si01-501 Instructions
System Configuration 85
2.3.5 POWERFUL Operation
15
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling
effect in any operation mode. You can get the maximum
capacity.
To start POWERFUL
operation
1. Press “POWERFUL button”.
•
POWERFUL operation ends in 20 minutes.
Then the system automatically operates
again with the settings which were used
before POWERFUL operation.
•
•
•
When using POWERFUL operation,
there are some functions which are not
available.
“ ” is displayed on the LCD.
To cancel POWERFUL
operation
2. Press “POWERFUL button”
again.
“ ” disappears from the LCD.
NOTE
Notes on POWERFUL operation
•
In COOL mode
To maximize the cooling effect, the capacity of outdoor unit must be increased and the air
flow rate be fixed to the maximum setting.
The temperature and air flow settings are not variable.
•
In DRY mode
The temperature setting is lowered by 2.5˚C and the air flow rate is slightly increased.
•
In FAN mode
The air flow rate is fixed to the maximum setting.
TEMP
ON/OFF
POWERFUL
MODE
TIMER
FAN
SWING
ON
CANCEL
OFF
ON
1, 2
To Next Page
Loading...
Need help?
General
