Daikin FTXS20G2V1B - Page 175

Indoor Unit SiENBE04-808_A
163 Removal Procedure
2. Remove the horizontal
blade (small).
1
Unfasten the center
shaft while bending the
horizontal blade (small)
slightly.
2
Unfasten the left shaft.
3
Unfasten the key
alignment shaft at the
right side.
3. Remove the fan guard.
1
Unfasten the hooks at
the lower part of the fan
guard with a flat
screwdriver.
2
Remove the fan guard.
Step Procedure Points
(R7925)
Horizontal blade (small)
(R7926)
(R7927)
Key
(R7928)
(R8079)
SiENBE04-808_A.pdf 175 21/02/2011 13:20:05