Daikin FTXS20G2V1B - Outdoor Unit - RK(X)S20-35 G2 V1 B, ARXS20-35 G2 V1 B; Removal of Outer Panels; Fan Motor

Outdoor Unit - RK(X)S20-35G2V1B, ARXS20-35G2V1B SiENBE04-808_A
183 Removal Procedure
2. Outdoor Unit - RK(X)S20-35G2V1B,
ARXS20-35G2V1B
2.1 Removal of Outer Panels / Fan Motor
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure Points
1. Appearance features
 Take care not to cut your
finger by the fins of the
outdoor heat exchanger.
2. Remove the panels.
 The stop valve cover is
united with the shield plate.
 When reassembling, make
sure to fit the 5 hooks.
1
Remove the screw of
the stop valve cover.
Pull down the stop
valve cover and remove
it.
DAIKIN
INVERTER
(R11890)
Stop
valve
cover
Shield plate
Hooks
(R7189)
SiENBE04-808_A.pdf 195 21/02/2011 13:20:10