Daikin FTXS20G2V1B - Removal of Fan Motor

SiENBE04-808_A Indoor Unit
Removal Procedure 180
1.9 Removal of Fan Motor
Procedure Warning Be sure to turn off all power supplies at least 10 min. before
disassembling work.
Step Procedure Points
1. Remove the right side
panel.
Preparation
 Remove the indoor heat
exchanger according to the
“Removal of Indoor Heat
Exchanger”.
1
Remove the 2 screws
and remove the right
side panel.
2
Release the fan motor
wire harness from the
hook.
(R8112)
(R8113)
Right side
panel
(R8114)
(R8115)
SiENBE04-808_A.pdf 192 21/02/2011 13:20:10