SiENBE04-808_A ATXS20/25/35/42/50G2V1B
System Configuration 86
3.4 COMFORT AIRFLOW Operation
Notes on “COMFORT AIRFLOW Operation”
The flow of air will be in the upward direction while in cooling mode
and in the downward direction while in heating mode, which will
provide a comfortable wind that will not come in direct contact with
people.
To start COMFORT AIRFLOW operation
1. Press “COMFORT/SENSOR button”
and select “ ” on the LCD.
• Each time the “COMFORT/SENSOR
button” is pressed a different setting
option is displayed on the LCD.
• By selecting “ ” from the following
icons, the air conditioner will be in
COMFORT AIRFLOW operation
combined with INTELLIGENT EYE
operation.
To cancel COMFORT AIRFLOW
operation
2. Press “COMFORT/SENSOR button”.
• Press the button to select “Blank”.
Note on the angles of the flaps
• The flap position will change, preventing air from blowing directly on the occupants of the room.
• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
• The volume of air will be set to AUTO. If the upward and downward airflow direction is selected, the COMFORT
AIRFLOW function will be canceled.
• Priority is given to the function of whichever button is pressed last.
• The COMFORT AIRFLOW function makes the following airflow direction adjustments.
The flaps will move upward while cooling so that the airflow will be directed upward.
The flaps will move downward while heating so that the airflow will be directed downward.
1, 2
Blank
Cooling operation
Heating operation
To Next Page
Loading...
