Daikin FTXS20G2V1B - Outdoor Unit - RK(X)S20-35 G2 V1 B9; Removal of Outer Panels; Fan Motor; Outdoor Unit - RK(X)S20-35 G2 V1 B9, ARXS20-35 G3 V1 B

Outdoor Unit - RK(X)S20-35G2V1B9, ARXS20-35G3V1B SiENBE04-808_A
209 Removal Procedure
3. Outdoor Unit - RK(X)S20-35G2V1B9,
ARXS20-35G3V1B
3.1 Removal of Outer Panels / Fan Motor
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
1. Appearance features
 Take care not to cut your
finger by the fins of the
outdoor heat exchanger.
2. Remove the panels.
 The stop valve cover is
united with the shield plate.
 When reassembling, make
sure to fit the 5 hooks.
1
Remove the screw of
the stop valve cover.
Pull down the stop
valve cover and remove
it.
DAIKIN
INVERTER
(R11890)
Stop
valve
cover
(R7188)
Shield plate
Hooks
(R7189)
SiENBE04-808_A.pdf 221 21/02/2011 13:20:14