FTXS20/25/35/42/50G2V1B SiENBE04-808_A
73 System Configuration
2.7 ECONO Operation
NOTE
ECONO operation is a function which enables efficient operation by
limiting the maximum power consumption value.
This function is useful for cases in which attention should be paid to
ensure a circuit breaker will not trip when the product runs alongside
other appliances.
To start ECONO operation
1. Press “ECONO button”.
• “ ” is displayed on the LCD..
To cancel ECONO operation
2. Press “ECONO button” again.
• “ ” disappears from the LCD.
• This diagram is a representation for
illustrative purposes only.
* The maximum running current and
power consumption of the air
conditioner in ECONO mode vary with
the connecting outdoor unit.
Notes on ECONO operation
• ECONO Operation can only be set when the unit is running. Pressing the OFF button causes the setting to be canceled,
and the “ ” disappears from the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power consumption of the outdoor unit
(operating frequency).
• ECONO operation functions in AUTO, COOL, DRY and HEAT modes.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Power consumption may not drop even if ECONO operation is used of the level of power consumption is already low.
1, 2
To Next Page
Loading...
