FTXS20/25/35/42/50G2V1B SiENBE04-808_A
77 System Configuration
To use WEEKLY TIMER
operation
Setting mode
• Make sure the day of the week and time
are set. If not, set the day of the week and
time.
1. Press “ button”.
• The day of the week and the reservation
number of the current day will be displayed.
• 1 to 4 settings can be made per day.
2. Press the “SELECT button” to select the
desired day of the week and reservation
number.
• Pressing the “SELECT button” changes
the reservation number and the day of the
week.
3. Press “NEXT button”.
• The day of the week and reservation number
will be set.
• “ ” and “ON” blink.
4. Press “SELECT button” to select the desired
mode.
• Pressing the “SELECT button” changes
“ON” or “OFF” setting in sequence.
• In case the reservation has already been
set, selecting “blank” deletes the
reservation.
• Go to STEP 9 if “blank” is selected.
5. Press “NEXT button”.
• The ON/OFF TIMER mode will be set.
• “ ” and the time blink.
6. Press “SELECT button” to select the desired
time.
• The time can be set between 0:00 and
23:50 in 10 minute intervals.
• To return to the ON/OFF TIMER mode
setting, press “BACK button”.
• Go to STEP 9 when setting the OFF
TIMER.
7. Press “NEXT button”.
• The time will be set.
• “ ” and the temperature blink.
6:00 8:30 17:30 22:00
25°C 27°C
Program 1 Program 2 Program 3 Program 4
ON OFF ON OFF
[Monday]
ON OFF Blank
ON TIMER OFF TIMER blank
To Next Page
Loading...
