Field Settings for Indoor Unit SiAF332111E
96 Part 5 Field Settings and Test Operation
1.3 Applicable Field Settings
: Available
― : Not available
Mode No.
First Code
No.
Setting Contents FXFSQ-AR FXMQ-PB FXMQ-AR FXAQ-P
10 (20)
0 Filter cleaning sign interval
1 Filter type
2 Remote controller thermistor
3 Filter cleaning sign
5
Information for intelligent Touch
Manager / intelligent Touch Controller
6
Remote controller thermistor control
during group control
7 Time for absence area detection ―――
10 Dry operation time during VRTsmart
11
Low airflow setting when thermostat
OFF during VRTsmart
11 (21)
6 Setting the rate of human detection ―――
7 Airflow adjustment ― ――
8
Compensating the temperature around
people
―――
12 (22)
0 Optional accessories output selection
1 External ON/OFF input
2 Thermostat differential changeover
5 Auto restart after power failure
6
Airflow setting when cooling thermostat
is OFF
11
Compensating the floor temperature
when cooling
―—―
13 (23)
0
Ceiling height setting, Setting of normal
airflow
――
1 Airflow direction setting ―――
2 Swing pattern settings ―――
4 Airflow direction adjustment range ――
6 External static pressure settings ― ――
7
Setting of swing patterns when cooling
thermostat is OFF
――
13 Setting of circulation airflow ―――
14 Circulation airflow patterns ―――
15 Switching panel type ―――
15 (25)
2 Direct duct connection ――
3
Drain pump and humidifier interlock
selection
5 Individual ventilation setting
1b
4
Display of error codes on the remote
controller
14
Setting restricted/permitted of airflow
block
1c 0 Room temperature display