Daikin VRV S RXQ4/5ARV1 - Monitor Mode (Mode 1)

SiAF332111E Field Settings for Outdoor Unit (6/8 HP Models)
Part 5 Field Settings and Test Operation 129
3.5 Monitor Mode (Mode 1)
In the monitor mode, information can be retrieved about settings related to performance,
addresses, number of units and actual operation data.
3.5.1 Retrieve data by using BS button on outdoor unit main PCB
Selecting monitoring item
SEG1 SEG2 SEG3
Normal
Normal
: hold 5 seconds: BLINKS: ON: OFFLegend Segment
MODE
BS1
MODE
BS1
RETURN
BS3
RETURN
BS3
SET
BS2
Checking for description of data
Press the SET (BS2) button to select
any of the monitoring item listed in the
following table.
Press the RETURN (BS3) button to
confirm.
The current state of monitoring item will
appear on the 7 segment display.
Press the MODE (BS1) button to return
to normal mode.
Press the RETURN (BS3) button to
return to the initial state of monitor mode.
If you become unsure of how to
proceed, press the MODE (BS1)
button and return to normal mode.
To enter monitor mode, press the
MODE (BS1) button while in
normal mode.