Field Settings for Outdoor Unit (6/8 HP Models) SiAF332111E
132 Part 5 Field Settings and Test Operation
3.6 Setting Mode (Mode 2)
3.6.1 How to Make Settings
Selection of setting items
Selection of setting conditions
Press and hold the MODE (BS1)
button for 5 seconds or more to
enter setting mode.
Press the RETURN (BS3) button to
return to the initial state of setting
mode.
Press the MODE (BS1) button to
return to normal mode.
If you become unsure of how to
proceed, press the MODE (BS1)
button and return to normal mode.
SEG1 SEG2 SEG3
Normal
Default
Normal
: hold 5 seconds: BLINKS: ON: OFFLegend Segment
MODE
BS1
MODE
BS1
RETURN
BS3
RETURN
BS3
RETURN
BS3
SET
BS2
SET
BS2
Press the SET (BS2) button to select
the setting condition you want.
Press the RETURN (BS3) button to
confirm.
Press the SET (BS2) button to
select any of the setting item listed
in the following table.
Press the RETURN (BS3) button to
confirm. The current state of setting
item blinks.
To Next Page
Loading...
