Daikin VRV S RXQ4/5ARV1 - Setting Mode and Monitor Mode

SiAF332111E Field Settings for Outdoor Unit (4/5 HP Models)
Part 5 Field Settings and Test Operation 111
2.2 Setting Mode and Monitor Mode
The following 3 modes can be changed over with the button switches on the PCB and you can
find the present mode by the status of the H1P indicator.
1. Setting mode 1 (H1P OFF)
Initial status (normal): Also indicates during abnormal.
2. Setting mode 2 (H1P ON)
Used to modify the operating status and to set program addresses, etc. Usually used in
servicing the system.
3. Monitor mode (H1P blinks)
Used to check the program made in setting mode 2.
12
ON
OFF
DS1
H1P H3P H5P H7P
H2P H4P H6P
MODE
(BS1)
SET
(BS2)
TEST
(BS4)
RESET
(BS5)
RETURN
(BS3)
Monitor mode
Setting mode 2
Setting mode 1
(Initial condition)
MODE
OFF
H1P
MODE
ON
H1P
H1P
Blinking
MODE
Press the
button.
RETURN (BS3) Press the
button.
RETURN (BS3)
Press the
button.
RETURN (BS3) Press the
button.
RETURN (BS3)
Press the
button.
RETURN (BS3)
Press the
button.
MODE (BS1) Press the
button.
MODE (BS1)
Press the MODE (BS1) button for more
than 5 seconds.
Press the MODE (BS1) button.
Select a setting item with
the SET (BS2) button.
Select a check item with
the SET (BS2) button.
Select a setting condition
with the
SET (BS2) button.
Setting condition
(Contents) display
Contents display