Daikin VRV S RXQ4/5ARV1 - Group No. Setting Example

SiAF332111E Centralized Control Group No. Setting
Part 3 Remote Controller 49
Caution
Group No. Setting (Unit)
5.2 Group No. Setting Example
When turning the power supply on, the unit may often not accept any operation after all
indications were displayed once for about 1 minute on the liquid crystal display. This is not an
operative fault.
Select Group Address
and then press the
Menu/Enter button.
Press the Cancel
button once.
Select Group
Address (Unit)
and then press
the
Menu/Enter
button.
Press the Cancel
button once.
Select the desired
Group No. using
the / (Up/Down)
buttons, and then
press
the
Menu/Enter
button.
Service
settings menu
is displayed.
Item 2 is
displayed.
Item 2 is
displayed.
Item 2 is
displayed.
Basic screen
is displayed.
Press and hold
the Cancel button
for 4 seconds or
more.
Press the Cancel
button once.
Press the Menu/Enter
button.
F1 F2
F1 F2
P1 P2
RC
RC
RC RC RC
F1 F2 P1 P2 F1 F2 P1 P2 F1 F2 P1 P2
F1 F2 P1 P2 F1 F2 P1 P2 F1 F2 P1 P2 F1 F2 P1 P2
No Remote Controller
1-03
1-00
1-01
Main Sub
1-02
1-04
Indoor/Outdoor
Outdoor unit
Group Control by Remote Controller
(automatic unit address)