SiAF332111E Field Settings for Indoor Unit
Part 5 Field Settings and Test Operation 109
How to Select Operation Mode
Whether operation by remote controller will be possible or not for turning ON/OFF, controlling
temperature or setting operation mode is selected and decided by the operation mode given on
the right edge of the table below.
: Factory setting
Do not select “timer operation possible by remote controller” if not using a remote controller.
Operation by timer is impossible in this case.
ON by remote
controller
(Unified ON by
central remote
controller)
OFF by remote
controller
(Unified OFF by
central remote
controller)
Temperature
control by
remote controller
Operation mode
setting by
remote controller
OFF by
remote
controller
Example
↓
Rejection
↓
Rejection
↓
Rejection
↓
Acceptance
↓
Acceptance
Control
mode is "1".
Control mode
Control by remote controller
Control mode
Operation
OFF
Temperature
control
Operation
mode setting
Unified operation,
individual operation by
central remote
controller, or operation
controlled by timer
Unified OFF,
individual stop by
central remote
controller, or timer
stop
ON/OFF control
impossible by
remote controller
Rejection (Example)
Rejection (Example)
Rejection
(Example)
Rejection
Acceptance 0
Rejection 10
Acceptance
(Example)
Acceptance
(Example)
1 (Example)
Rejection 11
OFF control only
possible by remote
controller
Acceptance
Rejection
Acceptance 2
Rejection 12
Acceptance
Acceptance 3
Rejection 13
Centralized
Acceptance
Rejection
Acceptance 4
Rejection 14
Acceptance
Acceptance 5
Rejection 15
Individual Acceptance
Rejection
Acceptance 6
Rejection 16
Acceptance
Acceptance 7
Rejection 17
Timer operation
possible by remote
controller
Acceptance (During
timer at ON position
only)
Rejection (During
timer at OFF
position only)
Rejection
Acceptance 8
Rejection 18
Acceptance
Acceptance 9
Rejection 19
Local remote controllers cannot set
temperature or operation mode when
the system is under centralized control
and the mark for centralized control
appears on the screen.
BRC1E63