Daikin VRV S RXQ4/5ARV1 - Page 125

SiAF332111E Field Settings for Outdoor Unit (4/5 HP Models)
Part 5 Field Settings and Test Operation 119
2.3.3 Setting Procedure of Night-Time Low Noise Operation and Demand
Control
1. Setting mode 1 (H1P OFF)
In setting mode 2, push the MODE (BS1) button one time.  The system enters setting
mode 1 and the H1P goes OFF.
In setting mode 1, the H6P (In low noise operation) and the H7P (In demand control) keep
lighting.
2. Setting mode 2 (H1P ON)
(1) In setting mode 1, push and hold the MODE (BS1) button for more than 5 seconds. 
The system enters setting mode 2 and the H1P lights up.
(2) Push the SET (BS2) button several times and match the LED display with the Setting No.
you want.
(3) Push the RETURN (BS3) button one time, and the present setting content is displayed.
 Push the SET (BS2) button several times and match the LED display with the setting
content (as shown on next page) you want.
(4) Push the RETURN (BS3) button two times.  The system returns to (1).
(5) Push the MODE (BS1) button one time.  The system returns to setting mode 1 and the
H1P goes OFF.
: ON : OFF l : Blink
)3()2()1(
Setting
No.
Setting
contents
Setting No. indication Setting No. indication Setting
contents
Setting contents indication (Initial setting)
H1P H2P H3P H4P H5P H6P H7P H1P H2P H3P H4P H5P H6P H7P H1P H2P H3P H4P H5P H6P H7P
12 External
low noise /
demand
setting
NO
(Factory
setting)
l
YES
l
22 Night-time
low noise
setting
OFF
(Factory
setting)
Level 1
l
Level 2
l
Level 3
l l
26 Night-time
low noise
operation
start setting
8:00 PM
l
10:00 PM
(Factory
setting)
l
12:00 AM
l
27 Night-time
low noise
operation
end setting
6:00 AM
l
7:00 AM
l
8:00 AM
(Factory
setting)
l
29 Capacity
precedence
setting
Low noise
precedence
(Factory
setting)
l
Capacity
precedence
l
30 Demand
setting 1
60% of
rated power
consumption
l
70% of
rated power
consumption
(Factory
setting)
l
80% of
rated power
consumption
l
32 Constant
demand
setting
OFF
(Factory
setting)
l
ON
l
Setting mode indication section Setting No. indication section Set contents indication section