SiAF332111E Service Settings Menu, Maintenance Menu
Part 3 Remote Controller 51
6.1.1 Service Settings Menu
Service settings menu Item 2 Remarks
Test Operation — —
Maintenance Contact None —
Maintenance Contact —, 0 to 9 (in order)
Field Settings Indoor Unit No. —
Mode No. —
First Code No. —
Second Code No. —
Demand Enable/Disable Enable, Disable
Settings 40%, 70%
Start time (by the unit of 30 minutes)
Ending time (by the unit of 30 minutes)
Min setpoints Differential None, Single SP, 0 to 8°C —
Group Address Group Address (Group) Gr Addr. Set
Group Address (Unit) Unit No., Gr Addr. Set
Indoor unit Airnet Address Unit No., Address Set —
Outdoor unit Airnet Address Unit No., Address Set —
Error History RC Error History Unit No., Error, Date, Time
(Up to 10 errors received by the remote
controller can be displayed.)
Indoor Unit Error History Unit No., Error, Date, Time
(Up to 5 errors from the indoor unit error
record can be displayed.)
Indoor Unit Status Unit No. —
Th1 Suction air thermistor
Th2 Heat exchanger liquid pipe thermistor
Th3 Heat exchanger gas pipe thermistor
Th4 Discharge air thermistor
Th5 —
Th6 —
Outdoor Unit Status Unit No. —
Th1 Outdoor air thermistor
Th2 Heat exchanger thermistor
Th3 Discharge pipe thermistor
Th4 —
Th5 —
Th6 —
Forced Fan ON Unit No. —
Switch Main Sub controller — —
Filter Indicator — —
Test Filter Auto Clean — —
Brush / Filter Ind — —
Disable Filter Auto Clean No, Yes —
To Next Page
Loading...
