Danfoss FC 102 Operating Instructions

Contents
1 Introduction
4
1.1 Product Overview
4
1.1.1 Interior Views 4
1.1.2 Extended Options Cabinets 5
1.2 Purpose of the Manual
6
1.3 Additional Resources
6
1.4 Product Overview
6
1.5 Internal Controller Functions
7
1.6 Frame Sizes and Power Ratings
7
2 Safety
8
2.1 Safety
8
3 Installation
9
3.1 Planning the Installation Site
9
3.2 Pre-Installation Check List
9
3.3 Mechanical Installation
9
3.3.1 Cooling 9
3.3.2 Lifting 10
3.3.3 Wall Mounting - IP21 (NEMA 1) and IP54 (NEMA 12) Units 10
3.4 Electrical Installation
11
3.4.1 General Requirements 11
3.4.2 Grounding Requirements 14
3.4.2.1 Leakage Current (>3.5 mA) 14
3.4.2.2 Grounding IP20 Enclosures 15
3.4.2.3 Grounding IP21/54 Enclosures 15
3.4.3 Motor Connection 16
3.4.3.1 Terminal Locations: D1h-D4h 16
3.4.3.2 Terminal Locations: D5h-D8h 20
3.4.4 Motor Cable 30
3.4.5 Motor Rotation Check 30
3.4.6 AC Mains Connection 30
3.5 Control Wiring Connection
30
3.5.1 Access 31
3.5.2 Using Screened Control Cables 31
3.5.3 Grounding of Screened Control Cables 31
3.5.4 Control Terminal Types 32
3.5.5 Wiring to Control Terminals 33
3.5.6 Control Terminal Functions 33
3.6 Serial Communication
33
Contents Operating Instructions
MG16D302 Danfoss A/S © Rev. 06/2014 All rights reserved. 1

Danfoss FC 102 Specifications

General

Brand	Danfoss
Model	FC 102
Category	DC Drives
Language	English