Troubleshooting
•
Cycle power to the frequency converter to
determine if the warning/alarm returns.
WARNING 250, New spare part
A component in the frequency converter has been
replaced. Reset the frequency converter to resume normal
operation.
WARNING 251, New typecode
The power card or other components have been replaced
and the typecode changed.
Troubleshooting
•
Reset to remove the warning and resume normal
operation.
Warnings and Alarms Operating Instructions
72 Danfoss A/S © Rev. 06/2014 All rights reserved. MG16D302
99
To Next Page
Loading...
Need help?
General