130BF228.10
L1
L2
L3
PE
PE
u
v
w
2
1
3
5
16
17
18
1 PLC 10 Mains cable (unshielded)
2
Minimum 16 mm
2
equalizing cable
11 Output contactor, and so on
3 Control cables 12 Cable insulation stripped
4 Minimum 200 mm between control cables, motor cables, and
mains cables.
13 Common ground busbar. Follow local and national
requirements for cabinet grounding.
5 Mains supply 14 Brake resistor
6 Bare (unpainted) surface 15 Metal box
7 Star washers 16 Connection to motor
8 Brake cable (shielded) 17 Motor
9 Motor cable (shielded) 18 EMC cable gland
Illustration 5.1 Example of Proper EMC Installation
Electrical Installation Operating Guide
MG16O102 Danfoss A/S © 01/2017 All rights reserved. 23
5 5
To Next Page
Loading...
Need help?
General