Danfoss FC 102

3.3 Interior View of Enclosures E1h and E2h
130BF206.11
FASTENER TORQUE:
M10 19Nm (14FT-LB)
M12 35Nm (26FT-LB)
- REGEN 83
FASTENER TORQUE:
M10 19Nm (14FT-LB)
M12 35Nm (26FT-LB)
+ REGEN 82
2
6
4
5
11
12
9
1
7
10
8
3
1 Control shelf (see Illustration 3.3) 7 Fan power card
2 Local control panel (LCP) cradle 8 Space heater (optional)
3 RFI lter (optional) 9 Mains disconnect (optional)
4 Mains fuses (required for UL compliance, but otherwise
optional)
10 Brake/regeneration terminals (optional)
5 Mains terminals 11 Motor terminals
6 RFI shield termination 12 Ground terminals
Illustration 3.1 Interior View of Enclosure E1h (Enclosure E2h is Similar)
Product Overview Operating Guide
MG16O102 Danfoss A/S © 01/2017 All rights reserved. 7
3 3