Danfoss FC 300 Instruction Manual

FC 300 Instruction Manual
How to Install
How to connect to the line su pply and grounding
(A2 and A3 enclosure).
How to connec t to the lin e supply and ground-
ing (A5 enclosure).
Howtoconnecttothelinesupplyandgrounding
(B1 and B2 enclosure).
NOTE
Check that AC line voltage corresponds to
the line voltage of the FC 300 nameplate.
IT Line
Do not conne
ct 400 V adjustable
frequency drives with RFI filters to line
supplies with a voltage betw een phase
and grou
nd of more than 440 V.
For IT lines and delta ground (grounded leg),
line voltage may exceed 440 V betw een
phase a
nd ground.
Terminals for line supply a nd grounding.
16
MG.33.A6.22 - VLT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Brand	Danfoss
Model	FC 300
Category	DC Drives
Language	English