FC 300 Instruction Manual
How to Program
" Quick Setup
0-01 Language
Option:
*
English UK (ENGLISH) [0]
German (DEUTSCH) [1]
French (FRANCAIS) [2]
Danish (DANSK) [3]
Spanish (ESPANOL) [4]
Italian (ITALIANO) [5]
Chinese (CHINESE) [10]
Finnish (FINNISH) [20]
English US (ENGLISH US) [22]
Greek (GREEK) [27]
Portuguese (PORTUGUESE) [28]
Slovenian (SLOVENIAN) [36]
Korean (KOREAN) [39]
Japanese (JAPANESE) [40]
Turkish (TURKISH) [41]
Traditional Chinese [42]
Bulgarian [43]
Serbian [44]
Romanian (ROMANIAN) [45]
Hungarian (HUNGARIAN) [46]
Czech [47]
Polish (POLISH) [48]
Russian [49]
Thai [50]
Bahasa Indonesian (BAHASA
INDONESIAN) [51]
Function:
Defines the language to be used in display.
The adjustable frequency drive can be delivered
with 4 various language packages. English and
German are included in all packages . English
cannot be erased or manipulated.
Language package 1 consists of:
English, German, French, Danish, Spanish,
Italian and Finnish.
Language package 2 consists of:
English, German, C hinese, Korean, Japanese,
Thai and Bahasa Indonesian.
Language package 3 consists of:
English, German, Slovenian, Bulgarian, Serbian,
Romanian, Hungarian, Czech and Russian.
Language package 4 consists of:
English, German, Spa nish, English US, Greek,
Brazilian Portuguese, Turkish and Polish.
1-20 Motor Power [kW]
Range:
0.5-10 HP [0.37-7.5 kW] [M-TYPE]
Function:
Enter the nominal motor power in kW according
to the motor nameplate data. The default value
corresponds to the nominal rated output of the unit.
This parameter cannot be adjusted while
the motor is running.
1-22 Motor Voltage
Range:
200-600 V [M-TYPE]
Function:
Enter the nominal motor voltage according to
the motor nameplate data. The default value
corresponds to the nominal rated o utput of
the unit. This parameter cannot be adjusted
while the motor is running.
1-23 Motor Frequency
Option:
*
50 Hz (50 HZ) [50]
60 Hz (60 HZ) [60]
Min - Max motor frequency: 20 - 300 Hz
Function:
Select the motor frequency value from the motor
nameplate data . Alternatively, set the value for
motor f requency to be infinitely variable. If a value
differentfrom50Hzor60Hzisselected,itis
necessary to adapt the load independent settings
in par. 1-50 to 1-53. For 87 Hz operation with
230/400 V m otors, set the nameplate data for
230V/50Hz. Adaptpar. 4-13Motor Speed High
Limit [RPM) and par. 3 -03 Maximum Reference
to the 87 Hz ap plic ation. This parameter cannot
be adjusted while the motor is running.
NOTE
Changing the value in this parameter
affects the setting of other parameters.
Par. 1-23 cannot be changed while
the motor is running.
*
default setting ()display text []value for use in comm unication via serial comm unication port
34
MG.33.A
6.22 - VLT is a registered Danfoss trademark
To Next Page
Loading...
Need help?
General
