Danfoss FC 300 Instruction Manual

FC 300 Instruction Manual
How to Read this Instruction Manual
" How to Read this Instruction Manual
This Ins truction Manual will help you get started, install, p rogram, and trouble shoot
your VLT
®
AutomationDrive FC 30 0.
The FC 300 comes in two shaft performance levels. F
C 301 ranges from scalar (U/f) to VV C+,
and FC 302 ranges from scalar (U/f) to servo performance.
ThisInstructionManualcoversbothFC301andFC302. Whereinformationcoversbothseries,we
refer to FC 300. Otherwise, we refer specifical
ly to either FC 301 or FC 302.
Chapter 1, How t o Read this Instruction
Manual, introduces the manual and informs you
about the approvals, symbols, a nd abbr
eviations
used in this literature.
Page divider for How to Read this Instruction Manual.
Chapter 2, Safety Instructions and General
Warnings,entail
s instructions on how to
handle the FC 300 correctly.
Page divider for
Safety Instructions and General Warnings.
C
hapter 3, How to Install , guides you through
mechanical and technical installation.
Page divider for How to Install
3
MG.33.A6.22 - VLT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Brand	Danfoss
Model	FC 300
Category	DC Drives
Language	English