Danfoss FC 300

FC 300 CANopen
- H o w t o C o n t r o l t h e F C 3 0 0 -
26 MG.33.J1.02 VER. 050301 – VLT is a registered Danfoss trademark
Bit 12, DSP 402 reserved.
Bit 13, DSP 402 reserved.
Bit 14, Running/Not running:
Bit 14 = "0" means that the motor is not
running.
Bit 14 = "1" means that the drive has a valid
start signal or that the output frequency is
greater than 0 Hz.
Bit 15, Danfoss reserved.