Danfoss FC 300 Manual

FC 300

CANopen
- H o w t o C o n f i g u r e t h e S y s t e m -
18 MG.33.J1.02 VER. 050301 – VLT is a registered Danfoss trademark
How to Control the FC300
Device Profile
Each device (object) is uniquely defined using an Object Dictionary description. In the CANopen
protocol the following object types are defined:
Object Index Range (hex) Object Type
0000 Not used
0001-001F Static Data Types
0020-003F Complex Data Types
0040-005F Manufacturer Specific Data Types
0060-007F Device Profile Specific Data Types
0080-009F Device Profile Specific Complex Data Types
00A0-0FFF Reserved for further use
1000-1FFF Communication Profile Area
2000-5FFF Manufacturer Specific Profile Area
6000-9FFF Standardised Device Profile Area
A000-FFFF Reserved for further use
Communication in CANopen
Communication with the frequency converter in CANopen is achieved via Service Data Objects
(SDOs), Process Data Objects (PDOs) and Network Management (NMT).

Danfoss FC 300 Specifications

General

Enclosure	IP20
Approvals	cUL, UL, CE
EMC filter	Built-in
Communication Options	CANopen, PROFIBUS DP
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Output Voltage	0-100% of supply voltage