Danfoss VACON 1000 User Manual

Table 35: Standards
Standard number
Standard Name
GB/T 156-2007
Standard Voltages
GB/T 1980-2005
Standard Frequencies
GB/T 2423.10-2008
Environmental testing for electric and electronic products - Part 2: Test methods - Test Fc: Vibration
(sinusoidal)
GB 2681-81
Colors of insulated conductors used in electrical assembly devices
GB 2682-1981
Colors of indicator lights and push-buttons used in electrical assembly devices
GB/T 3797-2005
Electrical control assemblies
GB/T 3859.1-93
Semiconductor convertors - Specification of basic requirements
GB/T 3859.2-93
Semiconductor convertors - Application guide
GB/T 3859.3-93
Semiconductor convertors - Transformers and reactors
GB 4208-2008
Degrees of protection provided by enclosures (IP code)
GB/T 4588.1-1996
Sectional specification: Single and double sided printed boards without plain holes
GB/T 4588.2-1996
Sectional specification: Single and double sided printed boards with plated-through holes
GB 7678-87
Semiconductor self-commutated convertors
GB/T 10233-2005
Basic testing method for low-voltage switchgear and control-gear assemblies
GB 12668-90
General specification for speed control assembly with semiconductor adjustable frequency for A.C.
motor
GB/T 15139-94
General technical standard for electrical equipment structure
GB/T 13422-92
Power semiconductor converters — Electrical test methods
GB/T 14549-93
Quality of electric energy supply-Harmonics in public supply network
GB/T 12668.3-2003
Adjustable speed electrical power drive systems Part 3: EMC product standard including specific test
methods
GB/T 12668.4-2006
Adjustable speed electrical power drive systems — Part 4: General requirements — Rating specifica-
tions for A.C. power drive systems above 1000 V A.C. not exceeding 35 kV
IEEE 519-1992
IEEE recommended practices and requirements for harmonic control in electrical power systems
IEC 60038
IEC standard voltages
IEC 60050-551:1998
International Electrotechnical Vocabulary – Part 551: Power electronics
IEC 60071-1:2006
Insulation coordination - Part 1: Definitions, principles and rules
IEC 60071-2:1996
Insulation coordination – Part 2: Application guide
IEC 60068-2-11
Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
IEC 60146-1-1:2009
Semiconductor converters – General requirements and line commutated converters – Part 1-1: Specifi-
cation of basic requirements
IEC 60146-1-2:2011
Semiconductor converters - General requirements and line commutated converters - Part 1-2: Applica-
tion guide
AQ363633621020en-000201 / 172F3117 | 137Danfoss A/S © 2021.06
Specifications
VACON® 1000
Operating Guide

Danfoss VACON 1000 Specifications

General

Brand	Danfoss
Model	VACON 1000
Category	Media Converter
Language	English