Danfoss vlt aqua Programming Guide

[104] PPO 4
[105] PPO 5
[106] PPO 6
[107] PPO 7
[108] PPO 8
[200] Custom telegram 1
2.9.6. 8-5* Digital/Bus
Parameters for configuring the control word Digital/Bus merging.
8-50 Coasting Select
Option: Function:
[0] Digital input
[1] Bus
[2] Logic AND
[3]
*
Logic OR
Select control of the coasting function via the terminals (digital
input) and/or via the bus.
NB!
This parameter is active only when
par. 8-01 Control Site is set to [0] Digital and
control word
.
8-52 DC Brake Select
Option: Function:
[0] Digital input
[1] Bus
[2] Logic AND
[3]
*
Logic OR
Select control of the DC brake via the terminals (digital input)
and/or via the fieldbus.
NB!
This parameter is active only when
par. 8-01 Control Site is set to [0] Digital and
control word
.
8-53 Start Select
Option: Function:
[0] Digital input
[1] Bus Activates Start command via the serial communication port or
fieldbus option.
2. Parameter Description VLT
®
AQUA Drive Programming Guide
112 MG.20.O2.02 - VLT
®
is a registered Danfoss trademark
2

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled