Danfoss VLT AutomationDrive FC 300 Series Programming Guide

Option
Name
Description
[84]
Digital input X46/11
Use the value of X46/11 (VLT® Extended Relay Card MCB 113).
[85]
Digital input X46/13
Use the value of X46/13 (VLT® Extended Relay Card MCB 113).
[94]
RS Flipflop 0
See parameter group 13-1* Comparators.
[95]
RS Flipflop 1
See parameter group 13-1* Comparators.
[96]
RS Flipflop 2
See parameter group 13-1* Comparators.
[97]
RS Flipflop 3
See parameter group 13-1* Comparators.
[98]
RS Flipflop 4
See parameter group 13-1* Comparators.
[99]
RS Flipflop 5
See parameter group 13-1* Comparators.
[100]
RS Flipflop 6
See parameter group 13-1* Comparators.
[101]
RS Flipflop 7
See parameter group 13-1* Comparators.
[212]
Emergency mode
[222]
Homing OK
[223]
On target
[224]
Position error
[225]
Position limit
[226]
Touch on target
[227]
Touch activated.
[228]
Comparator 6
Use the result of comparator 6.
[229]
Comparator 7
Use the result of comparator 7.
[230]
Comparator 8
Use the result of comparator 8.
[231]
Comparator 9
Use the result of comparator 9.
[232]
Logic rule 6
Use the result of logic rule 6.
[233]
Logic rule 7
Use the result of logic rule 7.
[234]
Logic rule 8
Use the result of logic rule 8.
[235]
Logic rule 9
Use the result of logic rule 9.
[238]
RS flipflop 8
See parameter group 13-1* Comparators.
[239]
RS flipflop 9
See parameter group 13-1* Comparators.
Parameter 13-02 Stop Event
Table 672: Parameter 13-02 Stop Event
13-02 Stop Event
Default value: Size related
Parameter type: Option, Array [4]
Setup: 2 setups
Conversion index: -
Data type: Uint8
Change during operation: True
AU275636650261en-000101 / 130R0334376 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English