Danfoss VLT AutomationDrive FC 361 - Page 113

9-81 Dened Parameters (2)
Array [116]
No LCP access
Read only
Range: Function:
0* [0 - 9999 ] This parameter shows a list of all
the dened frequency converter
parameters available for PROFINET.
9-82 Dened Parameters (3)
Array [116]
No LCP access
Read only
Range: Function:
0* [0 - 9999 ] This parameter shows a list of all
the dened frequency converter
parameters available for PROFINET.
9-83 Dened Parameters (4)
Array [116]
No LCP access
Read only
Range: Function:
0* [0 - 9999 ] This parameter shows a list of all
the dened frequency converter
parameters available for PROFINET.
9-84 Dened Parameters (5)
Array [115]
No LCP access
Read only
Range: Function:
0* [0 - 9999] This parameter shows a list of all
the dened frequency converter
parameters available for PROFINET.
9-85 Dened Parameters (6)
Array [116]
No LCP access
Read only
Range: Function:
0* [0 - 9999 ] This parameter shows a list of all
the dened frequency converter
parameters available for PROFINET.
9-90 Changed Parameters (1)
Array [116]
No LCP access
Read only
Range: Function:
0* [0 - 9999 ] This parameter shows a list of all
the frequency converter parameters
deviating from default setting.
9-91 Changed Parameters (2)
Array [116]
No LCP access
Read only
Range: Function:
0* [0 - 9999 ] This parameter shows a list of all
the frequency converter parameters
deviating from default setting.
9-92 Changed Parameters (3)
Array [116]
No LCP access
Read only
Range: Function:
0* [0 - 9999 ] This parameter shows a list of all
the frequency converter parameters
deviating from default setting.
9-93 Changed Parameters (4)
Array [116]
No LCP access
Read only
Range: Function:
0* [0 - 9999 ] This parameter shows a list of all
the frequency converter parameters
deviating from default setting.
9-94 Changed Parameters (5)
Array [116]
No LCP Address
Read only
Range: Function:
0* [0 - 9999 ] This parameter shows a list of all
the frequency converter parameters
deviating from default setting.
9-99 Probus Revision Counter
Range: Function:
0* [0 - 65535 ] Readout of revision count.
Parameter Descriptions Programming Guide
MG06J202 Danfoss A/S © 03/2019 All rights reserved. 111
4 4