Danfoss VLT AutomationDrive FC 361 - Page 173

5.2.12 13-** Smart Logic
Param
eter
numb
er
Paramete description Default value 4 set-up Change
during
operation
Conversion
index
Type
13-0* SLC Settings
13-00 SL Controller Mode ExpressionLimit 2 set-ups TRUE – Uint8
13-01 Start Event ExpressionLimit 2 set-ups TRUE – Uint8
13-02 Stop Event ExpressionLimit 2 set-ups TRUE – Uint8
13-03 Reset SLC [0] Do not reset SLC All set-ups TRUE – Uint8
13-1* Comparators
13-10 Comparator Operand ExpressionLimit 2 set-ups TRUE – Uint8
13-11 Comparator Operator ExpressionLimit 2 set-ups TRUE – Uint8
13-12 Comparator Value ExpressionLimit 2 set-ups TRUE -3 Int32
13-2* Timers
13-20 SL Controller Timer ExpressionLimit 1 set-up TRUE – TimD
13-4* Logic Rules
13-40 Logic Rule Boolean 1 ExpressionLimit 2 set-ups TRUE – Uint8
13-41 Logic Rule Operator 1 ExpressionLimit 2 set-ups TRUE – Uint8
13-42 Logic Rule Boolean 2 ExpressionLimit 2 set-ups TRUE – Uint8
13-43 Logic Rule Operator 2 ExpressionLimit 2 set-ups TRUE – Uint8
13-44 Logic Rule Boolean 3 ExpressionLimit 2 set-ups TRUE – Uint8
13-5* States
13-51 SL Controller Event ExpressionLimit 2 set-ups TRUE – Uint8
13-52 SL Controller Action ExpressionLimit 2 set-ups TRUE – Uint8
Parameter Lists Programming Guide
MG06J202 Danfoss A/S © 03/2019 All rights reserved. 171
5 5