Danfoss VLT AutomationDrive FC 361 Programming Guide

5.2.19 22-** Appl. Functions
Param
eter
numb
er
Parameter description Default value 4 set-up Change
during
operation
Conversion
index
Type
22-0* Miscellaneous
22-00 External Interlock Delay 0 s All set-ups TRUE 0 Uint16
22-4* Sleep Mode
22-40 Minimum Run Time 10 s All set-ups TRUE 0 Uint16
22-41 Minimum Sleep Time 10 s All set-ups TRUE 0 Uint16
22-42 Wake-up Speed [RPM] Expressionlimit All set-ups TRUE 0 Uint16
22-43 Wake-up Speed [Hz] Expressionlimit All set-ups TRUE 0 Uint16
22-44 Wake-up Ref./FB Dierence 10 % All set-ups TRUE 0 Int8
22-45 Setpoint Boost 0 % All set-ups TRUE 0 Int8
22-46 Maximum Boost Time 60 s All set-ups TRUE 0 Uint16
22-6* Broken Belt Detection
22-60 Broken Belt Function [0] O All set-ups TRUE – Uint8
22-61 Broken Belt Torque 10 % All set-ups TRUE 0 Uint8
22-62 Broken Belt Delay 10 s All set-ups TRUE 0 Uint16
5.2.20 30-** Special Features
Param
eter
numb
er
Parameter description Default value 4 set-up Change
during
operation
Conversion
index
Type
30-2* Adv. Start Adjust
30-20 High Starting Torque Time [s] ExpressionLimit All set-ups TRUE -2 Uint16
30-21 High Starting Torque Current [%] ExpressionLimit All set-ups TRUE -1 Uint32
30-22 Locked Rotor Protection ExpressionLimit All set-ups TRUE – Uint8
30-23 Locked Rotor Detection Time [s] ExpressionLimit All set-ups TRUE -2 Uint8
30-24 Locked Rotor Detection Speed Error [%] 25 % All set-ups TRUE -1 Uint32
5.2.21 40-** Special Settings
Param
eter
numb
er
Parameter description Default value 4 set-up Change
during
operation
Conversion
index
Type
40-4* Extend. Fault Log
40-40 Fault Log: Ext. Reference 0 % All set-ups FALSE -1 Int16
40-41 Fault Log: Frequency 0 Hz All set-ups FALSE -1 Uint16
40-42 Fault Log: Current 0 A All set-ups FALSE -2 Int32
40-43 Fault Log: Voltage 0 V All set-ups FALSE -1 Uint16
40-44 Fault Log: DC Link Voltage 0 V All set-ups FALSE 0 Uint16
40-45 Fault Log: Control Word 0 N/A All set-ups FALSE 0 V2
40-46 Fault Log: Status Word 0 N/A All set-ups FALSE 0 V2
Parameter Lists Programming Guide
MG06J202 Danfoss A/S © 03/2019 All rights reserved. 177
5 5

Danfoss VLT AutomationDrive FC 361 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 361
Category	DC Drives
Language	English