Danfoss VLT FC 103 Programming Guide

18-12 Fire Mode Log: Date and Time
Range: Function:
Size
related*
[ 0
-
0
]
This parameter contains an array with 10
elements. The parameter shows at which
date and time the logged event occurred.
The function relies on that the actual date
and time has been set in 0-70 Set Date and
Time. Note: There is no build in battery
back up of the clock. An external back up
must be used, eg the one in the MCB 109
Analog I/O option card. See Clock Settings,
parameter group 0-7*.
3.14.3 18-3* Analog I/O
Parameters for reporting the digital and analog I/O ports.
18-30 Analog Input X42/1
Range: Function:
0 * [-20 -
20
]
Read out of the value of the signal applied to
terminal X42/1 on the Analog I/O Card.
The units of the value shown in the LCP will
correspond to the mode selected in
26-00 Terminal X42/1 Mode.
18-31 Analog Input X42/3
Range: Function:
0 * [-20 -
20
]
Read out of the value of the signal applied to
terminal X42/3 on the Analog I/O Card.
The units of the value shown in the LCP will
correspond to the mode selected in
26-01 Terminal X42/3 Mode.
18-32 Analog Input X42/5
Range: Function:
0 * [-20 -
20
]
Read out of the value of the signal applied to
terminal X42/5 on the Analog I/O Card.
The units of the value shown in the LCP will
correspond to the mode selected in
26-02 Terminal X42/5 Mode.
18-33 Analog Out X42/7 [V]
Range: Function:
0 * [0 - 30 ] Read out of the value of the signal applied to
terminal X42/7 on the Analog I/O Card.
The value shown reflects the selection in
26-40 Terminal X42/7 Output.
18-34 Analog Out X42/9 [V]
Range: Function:
0 * [0 - 30 ] Read out of the value of the signal applied to
terminal
X42/9 on the Analog I/O Card.
The value shown reflects the selection in
26-50 Terminal X42/9 Output.
18-35 Analog Out X42/11 [V]
Range: Function:
0 * [0 - 30 ] Read out of the value of the signal applied to
terminal
X42/11 on the Analog I/O Card.
The value shown reflects the selection in
26-60 Terminal X42/11 Output.
Parameter Description
VLT
®
Refrigeration Drive Programming Guide
MG16H102 - VLT
®
is a registered Danfoss trademark
111
3 3

Danfoss VLT FC 103 Specifications

General

Brand	Danfoss
Model	VLT FC 103
Category	DC Drives
Language	English