Danfoss VLT FC 103 Programming Guide

+
-
+
-
-
-
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
130BA492.10
Untitled - MCT 10 SET - up Software
File Edit View Insert Communication Tools Options Help
ID Name Setup 1 Setup 2 Setup 3 Setup 4
2310.0 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.1 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.2 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.3 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.4 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.5 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.6 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.7 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.8 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.9 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.10 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.11 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.12 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.13 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.14 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.15 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.16 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.17 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.18 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2310.19 Maintenance Item Motor bearings Motor bearings Motor bearings Motor bearings
2311.0 Maintenance Action Lubricate Lubricate Lubricates Lubricate
2311.2 Maintenance Action Lubricate Lubricate Lubricates Lubricate
2311.3 Maintenance Action Lubricate Lubricate Lubricates Lubricate
2311.4 Maintenance Action Lubricate Lubricate Lubricates Lubricate
2311.5 Maintenance Action Lubricate Lubricate Lubricates Lubricate
2311.6 Maintenance Action Lubricate Lubricate Lubricates Lubricate
Network
Project
VLT AQUA DRIVE
All Parameters
Operation/Display
Load/Motor
Brakes
Reference / Ramps
Limits / Warnings
Digital In/Out
Analog In/Out
Comm. andOptions
Smart logic
Special Functions
Drive Information
Data Readouts
Info & Readouts
Drive Closed Loop
Ext. Closed Loop
Application Functions
Time-based Functions
Timed Actions
Maintenance
Maintenance Reset
Energy Log
Trending
Payback Counter
Cascade Controller
Water Application Functions
Cascade Controller
Illustration 3.56
The LCP indicates (with a wrench-icon and an “M”) when it
is
time for a Preventive Maintenance Action, and can be
programmed to be indicated on a digital output in
parameter group 5-3*. The Preventive Maintenance Status
may be read in 16-96 Maintenance Word. A Preventive
Maintenance indication can be reset from a digital input,
the FC bus or manually from the LCP through 23-15 Reset
Maintenance Word.
A Maintenance Log with the latest 10 loggings can be read
from parameter group 18-0* and via the Alarm log key on
the LCP after selecting Maintenance Log.
NOTE
The
Preventive Maintenance Events are defined in a 20
element array. Hence each Preventive Maintenance Event
must use the same array element index in
23-10 Maintenance Item to 23-14 Maintenance Date and
Time.
23-10 Maintenance Item
Array [20]
Option: Function:
Array with 20 elements displayed
below
parameter number in the
display. Press [OK] and step between
elements with [◄], [►], [
▲
] and [
▼
].
23-10 Maintenance Item
Array [20]
Option: Function:
Select the item to be associated with
the
Preventive Maintenance Event.
[1] * Motor bearings
[2] Fan bearings
[3] Pump bearings
[4] Valve
[5] Pressure transmitter
[6] Flow transmitter
[7] Temperature transm.
[8] Pump seals
[9] Fan belt
[10] Filter
[11] Drive cooling fan
[12] System health check
[13] Warranty
[20] Maintenance Text 0
[21] Maintenance Text 1
[22] Maintenance Text 2
[23] Maintenance Text 3
[24] Maintenance Text 4
[25] Maintenance Text 5
Parameter Description
VLT
®
Refrigeration Drive Programming Guide
MG16H102 - VLT
®
is a registered Danfoss trademark
143
3 3

Danfoss VLT FC 103 Specifications

General

Brand	Danfoss
Model	VLT FC 103
Category	DC Drives
Language	English