Danfoss VLT Safety Option MCB 150 User Manual

MCB 150/151 can be combined with the following A options:
• VLT® PROFIBUS DP-V1 MCA101
• VLT® DeviceNet MCA 104
• VLT® CanOpenMCA 105
• VLT® PROFINET MCA 120
• VLT® EtherNet/IP MCA 121
• VLT® Modbus TCP MCA 122
• VLT® POWERLINK MCA 123
• VLT® EtherCAT MCA 124
The MCB 151 can be combined with the following C options:
• VLT® Sensorless Safety MCB 159
The safety option is compatible with asynchronous and synchronous (PM) motors. Both motor types can be used in U/f and VVC+ in
closed and open loop as well as in FLUX open-loop control. Compliance to further motor types and control modes is to come. Contact
the local supplier for latest information.
The following software versions are required as a minimum for using MCB 150/151:
• LCP software version 7.0.
• VLT AutomationDrive FC 302 firmware version 6.64.
All drives, options, and control mode combinations not listed above are not allowed.
Functions and Systems Overview
Installation Guide | VLT® Safety Option MCB 150/151
AQ279747441421en-000101 / 130R0292
36 | Danfoss A/S © 2018.09

Danfoss VLT Safety Option MCB 150 Specifications

General

Brand	Danfoss
Model	VLT Safety Option MCB 150
Category	Control Unit
Language	English