Danfoss VLT Safety Option MCB 150 User Manual

Table 1: Version and Changes Applied
Edition Remarks
MG34W4xx Editorial changes. Installation of VLT® Sensorless Safety MCB 159 added.
1.4 Type Approvals and Certifications
The following list is a selection of possible type approvals and certifications for Danfoss drives:
NOTICE
Drives of enclosure size T7 (525–690 V) are not UL listed.
089
NOTICE
The specific approvals and certification for the drive are on the nameplate of the drive. For more information, contact the local
Danfoss office or partner.
For more information on UL 508C thermal memory retention requirements, refer to the section Motor Thermal Protection in the
product-specific design guide.
For more information on compliance with the European Agreement concerning International Carriage of Dangerous Goods by Inland
Waterways (ADN), refer to section AND-compliant Installation in the product-specific design guide.
Introduction
Installation Guide | VLT® Safety Option MCB 150/151
AQ279747441421en-000101 / 130R0292
8 | Danfoss A/S © 2018.09

Danfoss VLT Safety Option MCB 150 Specifications

General

Brand	Danfoss
Model	VLT Safety Option MCB 150
Category	Control Unit
Language	English