Danfoss VLT Safety Option MCB 150 User Manual

1 Introduction
1.1 Purpose of this Operating Guide
This operating guide provides information for safe installation and commissioning of the safety option. It is intended for use by
qualified personnel. Read and follow the instructions to use the option safely and professionally. Pay particular attention to the safety
instructions and general warnings. Always keep this operating guide available with the option.
1.2 Available Resources
Throughout this guide there are references to other manuals that are helpful when installing the VLT® Safety Option MCB 151/152.
2
3
MCT 10
1
e30bc961.13
+
+
1 Installation phase: Use this installation guide and refer to VLT
AutomationDrive FC 301/FC 302 Operating Guide.
3 Test phase: Use the commissioning report generated via the
MCT 10 Safe Plug-in.
2 Parameterization phase: Refer to VLT® Motion Control Tool
MCT 10 Set-up Software Operating Guide.
Illustration 1: System Overview
Also refer to www.danfoss.com/en/search/?filter=type%3Adocumentation%2Csegment%3Adds for more information.
1.3 Document Version
This manual is regularly reviewed and updated. All suggestions for improvement are welcome. See document version and changes
applied in table 1.
Introduction
Installation Guide | VLT® Safety Option MCB 150/151
AQ279747441421en-000101 / 130R0292 | 7
Danfoss A/S © 2018.09

Danfoss VLT Safety Option MCB 150 Specifications

General

Brand	Danfoss
Model	VLT Safety Option MCB 150
Category	Control Unit
Language	English