Danfoss VLT series Installation Guide

5.3 Weights
CAUTION
DIVERGENT WEIGHT VALUES
The unit weight depends on the individual congu-
rations. The shipping weight depends on the type of
packing.
The values in Table 5.4 are typical unit weight values
valid for units equipped with
•
Contactor.
•
Disconnect.
•
Fuse.
•
dU/dt-lter.
Refer to the packing documentation for the precise unit
and shipping weights.
Enclosure Unit weight
90 kW 300 kg (661 lb)
250 kW 450 kg (992 lb)
315 kW 650 kg (1433 lb)
400 kW 750 kg (1653 lb)
Table 5.4 Unit Weights
Specications
VLT
®
Plus Panel
34 Danfoss A/S © 09/2015 All rights reserved. MG13B102
55

Danfoss VLT series Specifications

General

Series	VLT
Category	DC Drives
Output Voltage	0-100% of input voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature, Short Circuit, Ground Fault
Communication Interfaces	Profibus, CANopen
Enclosure Rating	IP20, IP21, IP55, IP66
Cooling Method	Forced Air Cooling, Convection Cooling
Control Mode	Sensorless Vector, Closed Loop Vector
Ambient Temperature	-10°C to +50°C (14°F to 122°F)