1.5 Approvals and Certications
Illustration 1.4 CE
The VLT
®
Plus Panel carries a CE mark in accordance with
the Low Voltage Directive 2006/95/EC and EMC Directive
2004/108/EC of the European Union.
The frequency converter complies with UL 508C thermal
memory retention requirements. For more information,
refer to the section Motor Thermal Protection in the
product-specic design guide.
NOTICE
Imposed limitations on the output frequency
(due to export control regulations):
From software version 6.72 onwards, the output
frequency of the frequency converter is limited to 590
Hz. Software versions 6.xx also limit the maximum
output frequency to 590 Hz, but these versions cannot
be ashed, that is, neither downgraded nor upgraded.
1.6 Disposal
Do not dispose of equipment containing
electrical components together with
domestic waste.
Collect it separately in accordance with
local and currently valid legislation.
1.7 Symbols, Abbreviations, and
Conventions
Abbreviation Denition
AC Alternating current
AMA Automatic motor adaptation
AVM Asynchronous vector modulation
DC Direct current
DE Drive-end
ELCB Earth (ground) leakage circuit breaker
EMC Electromagnetic compatibility
EMI Electromagnetic interference
HO High overload
IGBT Insulated-gate bipolar transistor
LCP Local control panel
LED Light-emitting diode
NED Non-drive end
NO Normal overload
RCD Residual current device
RDF Rated diversity factor according to DIN EN
61439
RFI Radio-frequency interference, see EMI
SFAVM Stator ux-oriented asynchronous vector
modulation
STO Safe Torque O
UPS Uninterruptible power supply
Table 1.2 Symbols and Abbreviations
Conventions
Numbered lists indicate procedures.
Bullet lists indicate other information and description of
illustrations.
Italicized text indicates:
•
Cross-reference.
•
Link.
•
Footnote.
•
Parameter name.
•
Parameter group name.
•
Parameter option.
Introduction Installation Guide
MG13B102 Danfoss A/S © 09/2015 All rights reserved. 7
1 1
To Next Page
Loading...
Need help?
General
