How do I resolve a 'Printer Card Jam' on my Dascom printer?
If your Dascom printer has a card jam, do not turn off the power. Open the front cover, turn the rollers to clear the jammed card, and then close the front cover. Press the SET Key to clear the warning; the printer will resume printing after initialization.
What does 'Check Ribbon/Film' mean on my Dascom Printer?
The 'Check Ribbon/Film' message on your Dascom Printer means the unused ribbon or retransfer ribbon has reached the levels set in “Ribbon Near End” or “RTM Near End”. Make sure there is enough unused ribbon or retransfer film to complete your print job.
Why is my Dascom DC-7600 ejecting blank cards?
The Dascom Printer might be ejecting blank cards because the ribbon or retransfer film has run out or is damaged. Replace them if needed.
What to do if my Dascom DC-7600 displays 'Film End'?
If your Dascom Printer displays 'Film End', do not turn off the power. Replace the retransfer film, referring to Section 2.3. Press the SET Key to clear this warning, and the printer will resume previous printing after initialization.
What to do if my Dascom DC-7600 Printer displays 'Invalid Film'?
If your Dascom Printer displays 'Invalid Film', open the front cover and check for any issues with the retransfer film. Correct any faults, then close the top cover. Press the SET Key to clear the warning, and the printer will resume printing after initialization.
What to do if my Dascom DC-7600 displays 'Invalid Ribbon'?
If your Dascom Printer shows 'Invalid Ribbon', which may be due to an unrecognized ribbon, do not turn off the power. Reload the ribbon, referring to Section 2.2, if it's skewed. Also, verify that the ribbon type is YMCK/YMCKK. Press the SET Key to clear the warning, and the printer will resume printing after initialization.
How to fix a Film Jam on a Dascom Printer?
If your Dascom Printer has a film jam, possibly due to a retransfer film winding problem, do not turn off the power. Reload the retransfer film, referring to Section 2.3. Press the SET Key to clear the warning, and the printer will resume printing after initialization.
How to fix a Ribbon Jam on a Dascom Printer?
If your Dascom Printer is experiencing a ribbon jam, which may be due to a ribbon winding problem, do not turn off the power. Reload the ribbon, referring to Section 2.2. Press the SET Key to clear the warning, and the printer will resume printing after initialization.
Essential safety precautions for operating the DC-7600 printer, covering installation and power.
Detailed identification and function of the printer's external and internal parts.
Explanation of buttons, status LEDs, buzzer, and LCD display for printer control.
Step-by-step instructions for connecting the DC-7600 printer to its power source.
How to connect the DC-7600 printer to a computer using USB or Ethernet.
Comprehensive guide for installing the DC-7600 driver on Windows systems.
Step-by-step instructions for installing the Windows driver via a USB connection.
Procedure for installing the Windows driver for network connection via Ethernet.
Procedures for loading various types of cards into the Dascom DC-7600 printer.
Step-by-step guide for changing the ribbon cartridge in the DC-7600 printer.
Instructions for replacing the retransfer film when a 'FILM END' warning appears.
Procedure for replacing the cleaning roller, recommended with ribbon changes.
Instructions for downloading and installing firmware updates for the DC-7600 printer.
List of common printer warning messages and their corresponding corrective actions.
Systematic steps to diagnose and resolve common printing faults.
Troubleshooting common issues like no print output or blank cards.
Procedures for safely removing jammed cards and preventing future occurrences.
General| Type | Dot Matrix Printer |
|---|---|
| Resolution | Up to 360 x 360 dpi |
| Print Resolution | 360 x 360 dpi |
| Paper Handling | Tractor feed |
| Connectivity | Parallel, USB |
| Emulation | Epson ESC/P |
| Number of Pins | 24 |
| Paper Thickness | 0.065 mm to 0.46 mm |
| Interface | USB 2.0, IEEE-1284 Parallel |
| Print Technology | Serial Impact Dot Matrix |
| Print Method | Serial Impact Dot Matrix |
To Next Page
