Data Aire dap 4 User Manual

63•dap4UserManual
The following can be changed by pressing the DOWN key:
Channel–therearesix(6)selections(Y1,Y2,Y3,Y4,Y5andY6).ThereareveAnalog
outputs available. DO NOT ASSIGN THE SAME CHANNEL ON MORE THAN ONE ANA-
LOG OUTPUT.
Action: there are two choices; DIRECT AND REVERSE
Minimum: the range is from 0.0vdc to 10.0vdc
Maximum:therangeisfrom0.0vdcto10.0vdc
Once a selection or selections have been made, move the cursor to the title block by pressing the
ENTER key
▼PresstheDOWNkeytoviewthenextscreen:
The following will be displayed (values are for reference only):
Move the cursor by pressing the ENTER key. Move the cursor to change the setting.
The following can be changed by pressing the DOWN key:
Channel–therearesix(6)selections(Y1,Y2,Y3,Y4,Y5andY6).ThereareveAnalog
outputs available. DO NOT ASSIGN THE SAME CHANNEL ON MORE THAN ONE ANA-
LOG OUTPUT.
Action: there are two choices; DIRECT AND REVERSE
Minimum: the range is from 0.0vdc to 10.0vdc
Maximum:therangeisfrom0.0vdcto10.0vdc
Once a selection or selections have been made, move the cursor to the title block by pressing the
ENTER key
▼PresstheDOWNkeytoviewthenextscreen:
Analog Output Config
Channel: Y1
Action: DIRECT
Minimum 0.0vdc
Maximum: 0.0vdc

Data Aire dap 4 Specifications

General

Brand	Data Aire
Model	dap 4
Category	Control Unit
Language	English