Data Aire dap 4 User Manual

39•dap4UserManual
MENU K – ALARMS and LIMITS
MENU K is for setting the control alarms and limits. (Service Level password required and entry
should be limited to service personnel starting or servicing the equipment).
In the Main Menu screen press the UP or DOWN key until “K. Alarms & Limits” appears and is
highlighted. Press the ENTER key.
The following will be displayed (inputs are for reference only):
Available Selections:
Audio Mode: None
Full On
Long Beep
Short Beep
Pwr-Up: Auto, No Alarm
Auto, With Alarm
Man, Clr Alarm
Maint Due Msg: None
The range is 0 to 1000 hours
Once a selection or selections have been made, move the cursor to the title block by pressing the
ENTER key
▼PresstheDOWNkeytoviewthenextscreen:
The following will be displayed (values are for reference only):
Alarm Settings
Audio Mode: None
Pwr-Up: Auto, No Alarm
Maint Due Msg: None
Alarm Settings
Comp Short Cycle: Yes
Floor Water Alarm
Action: Alarm Only
Reset Alarm Log: No
Alarm Screen Contact:
No Contact Message

Data Aire dap 4 Specifications

General

Brand	Data Aire
Model	dap 4
Category	Control Unit
Language	English