EASYSENSE Q3+ and Q5+ DO185 (2)
What’s supplied?
The EASYSENSE software
(V2.7 or above) with
uick Start Guide
Note: The battery pack in EASYSENSE Q is fully charged before it leaves Data Harvest. Even when turned
off, EASYSENSE Q will use a small amount of current, and the battery will slowly discharge. If the logger
is to be stored for long periods without use then it is a good idea to recharge the batteries fully every 6 – 8
weeks. See page 26.
Extras supplied in the pack option
Two plug-in Temperature sensors
A USB cable
Two long Smart Q sensor leads
A carry bag
The EASYSENSE Q3+ or Q5+ data logger
A power supply unit
(UK version shown)
© Data Harvest Group Ltd.
3
To Next Page
Loading...
