DataCard SD260 - Page 55

SD Series Installation and Administrator’s Guide 47
Changesettingsasneeded,andthenclickSetCurrenttoapplychanges.
• CardRegistration—Setthestartinglocationoftheprintedarea.Thevalues
areinmm(1mm=0.0394in).Thesettingspecifiesthedistancetomovethe
cardbeforeprinting.
• Increasethevaluetomoveprintingclosertothecard’sleadingedge.
• Decreasethevaluetomoveprintingawa yfromthecard’sleadingedge.
• ColorManagement—Specifywhethertousecolormanagementintheprinter.
• Nonedisablescolormanagementintheprinterandallowscolor
managementtobehandledbytheapplication.
• sRGBColorSpaceusesthestandardRed,Green,andBluecolorspace.
• MatchSPusesthecolormanagementtechnologyofthecardprinte r.
12) KWhiteShade 0 0 [-100 – 100]
13) LeadTrim 0.254 0.254 [0 – 5.08]
14) SettingsGroupPurpose Print Print 
15) TPower 0 0 [-100 – 100]
16) TPowerDuplex 0 0 [-100 – 100]
17) TrailTrim 1.27 1.27 [0 – 5.08]
18) TWhiteShade 0 0 [-100 – 100]
19) YMCPower 0 0 [-100 – 100]
20) YMCPower600 0 0 [-100 – 100]
21) YMCPowerDuplex 0 0 [-100 – 100]
22) YMCPowerNosRGB -48 -48 [-100 – 100]
23) YMCWhiteShade 0 0 [-100 – 100]
Description Default Value
Current Value
(unit)
Allowed
Range