DataCard SD260 - Power Cords

SD Series Installation and Administrator’s Guide 91
•
Laminator—Thelaminatorpowersupplyisratedat100–240
VAC,47–63Hzandusesupto2.2ampsmaximum.Itisself‐
adjustingwithintheratedinputvoltage.
Power Cords
Youcanorderpo wercordsforthefollowing:
• Printer—Theprinterpowercordconnectstheprinterpowersupplytothe
facilitypower.Besuretouseacordthatgroundstothefacilitypowersource.
• Laminator—Thelaminatorpowercordconnectsthelaminatorpowersupply
tothefacilitypower.
Theprinterandlaminatorcanuseoneofthefollowingcountry‐specificpower
cords:
• USApowercord
• Europeanpowercord
• Australianpowercord
• UnitedKingdompowercord
• Danishpowercord
• Indianpowercord
• Israelipowercord
• Italianpowercord
• Swisspowercord
• Chinesepowercord
• Japanesepowercord