DataCard SD260 - Overlay Storage Guidelines

SD Series Installation and Administrator’s Guide 83
Overlay Storage Guidelines
• Storeoverlaymaterialintheoriginalpackageuntilyouloaditinthelaminator.
Keeptheoriginalpackagingcloseduntilyouarereadytousetheoverlay.
• Theoverla ymaintainsitsqualityforaboutoneyear.Foroptimumcardquality,
purchaseandstorequantitiesofmaterialthatcanbeusedwithinoneyear.
• Overlaymaterialmightrequiresecurestorageandtracking.Followyour
organization’spolicyforstoringandtrackingthesuppliesusedtomakecards.
• Storetheoverlayinalocationawayfromdirectsunlight,withatemperature
between50°and80°F(10°and27°C).Arangeof30%to70%humidityis
recommended.
• Installsupplyrollsatroomtemperature.Ifsuppliesarestoredinan
environmentthatiscoolerthantheprinterenvironment,allowsuppliesto
reachroomtemperaturebeforeyouusethem.
• Iftheprinterwillnotbeusedforanextendedperiod,removesuppliesfrom
thelaminatorandstorethemwithnewsupplies.