DataCard SD260 - Page 90

82 Supplies and Parts
Thefollowinglaminatorsuppliesareavailable.Allareavailableforafullcard,
smartcard,ormagneticstripecard.
Patch:
• ClearDuraGard,0.5mil,upto350images/roll
• ClearDuraGard,1.0mil,upto300images/roll
• HolographicDuraGard0.6mil,Random,upto350images/roll
• HolographicDuraGard,Registered,0.6mi l,upto350images/roll
• HolographicDuraGard,1.0mil,Random,upto300images/roll
• HolographicDuraGardRegistered,1.0mi l,upto300images/roll
Topcoat:
• Clear,numberofimagesdependsonlaminationsettings
• Holographic,Random,numberofimagesdependsonlaminationsettings
• RegisteredHolographic,upto600images/roll
• *ClearDuraShield,numberofimagesdependsonlaminationsettings
*DuraShieldoverlayhasthefollowingrequirements:
• Itmustbeusedwitharibbonthatincludesatopcoatpanel:KT,
YMCKT,YMCKT‐K,YMCKT‐KT,ymcKT,YMCKF‐KT.
Note:IfyouuseaYMCKF‐KTribbon,refertotheprinter’sDriverGuide
forinformationaboutsettingupacarddesignthat
usestheUV(F)
panel.
• Itmustbeappliedoverthetopcoat.
• ItissupportedonlywithPVCcompositecards.