DataCard SD260 - Page 58

50 Printer Manager
• TPowerDuplex—Modifytheintensityoftheback‐sideT(topcoat)ribbon
panel.
• Increasethevaluetomakeprintedtopcoatthickerormoreuniform.
• Decreasethevaluetopreventribbonbreakswhileprintingthetopcoat.
• TrailTrim—Modifythenumberofmillimeterstoremovefromthetrailing
edgeofafull‐sizeimagetokeepitwithintheprintarea(1mm=0.0394in.or
about11.8dotrows).
• Increasethevaluetolengthentheprintedarea.
• Decreasethevaluetoshortentheprintedarea.
• TWhiteShade—Modifytheamountofpowerappliedtotheprintheadto
reduceribbonfrictionwithouttransferringmaterial.Decreasethevalueif
materialtransfers tothecardwhenitshouldnot.
• YMCPower—Modifytheinte nsityoftheYMC(color)ribbonpanels.
• Increasethevaluetomakethecolorprintingmoreintense.
• Decreasethevaluetoreducethecolorintensityortopreventfrequent
ribbonbreakswhenprintingcolors.
• YMCPower600—Modifytheprintintensityat600dpifortheYMC(color)
ribbonpanels.
• Increasethevaluetomakethecolorprintingmoreintense.
• Decreasethevaluetoreducethecolorintensityortopreventfrequent
ribbonbreakswhenprintingcolors.
• YMCPowerDuplex—Modifytheintensityoftheback‐sideYMC(color)ribbon
panels.
• Increasethevaluetomakethecolorprintingmoreintense.
• Decreasethevaluetoreducethecolorintensityortopreventfrequent
ribbonbreakswhenprintingcolors.
• YMCPowerNosRGB—Modifytheintensitywhenyouareprintingwithoutthe
sRGBcolormode.
• Increasethevaluetomakethenon‐sRGBcolordarker
• Decreasethevalueifusingnon‐sRGBcolormodetopreventoverlydark
printingorribbonwrinklesortears.