DataCard SD460 Installation And Administrator's Guide

94 Supplies and Parts
Overlay Storage Guidelines
 Store overlay material in the original package until you load it in the laminator. Keep the
original packaging closed until you are ready to use the overlay.
 The overlay maintains its quality for about one year. For optimum card quality, purchase and
store quantities of material that can be used within one year.
 Overlay material might require secure storage and tracking. Follow your organization’s policy
for storing and tracking the supplies used to make cards.
 Store the overlay in a location away from direct sunlight, with a temperature between 50°
and 80°F (10° and 27°C). A range of 30% to 70% humidity is recommended.
 Install supply rolls at room temperature. If supplies are stored in an environment that is
cooler than the printer environment, allow supplies to reach room temperature before you
use them.
 If the printer will not be used for an extended period, remove supplies from the laminator
and store them with new supplies.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm